Wild Horses Kit
Complete Wild Horses kit comes with all bracketry, hardware, standard pump, hoses and F-150 steering box. Again, it's a 2WD version. Bracket is first bolted into place and then welded. Steering box attaches to bracket, while holes in bracket are for attaching to frame.
The kit has a U-joint coupler that comes with one end splined to fit over the input shaft of the steering box, while the other end fits over the stock manual steering shaft. This end is trimmed for fitment and then cut to accept a new keyway. A track bar drop bracket (installed when a vehicle is lifted from its stock height) is provided. Should your Bronco already be lifted, you may have this bracket in place. If not, install it, as it's necessary to eliminate any bump steer you may encounter.